Translations:Flytec Balloon 4:PersonalSettings/2/en
Vario
Defines how vertical speeds are indicated. Inside the Units menu, select Vario and press to get here. Use to adjust the value. Select one with or cancel with .
- m/s: vertical speed is shown in meter per second.
- fpm: vertical speed is shown in feet per minute. The numeric vario will show 1/100*fpm. The graphical vario currently still indicates m/s, we are working on resolving that.
Distance
Defines how distances are indicated. Inside the Units menu, select Distance and press to get here. Use to adjust the value. Select one with or cancel with .
- km: distance is shown in kilometer.
- miles: distance is shown in international miles (1 mile = 1.609344 km).
Time
Defines how time of day is indicated. Inside the Units menu, select Time and press to get here. Use to adjust the value. Select one with or cancel with .
- 24h: times are shown in 24-hour format (e.g. 17:33).
- 12h: times are shown in 12-hour format (e.g. 5:33 pm).
Speed
Defines how horizontal speed is indicated. Inside the Units menu, select Speed and press to get here. Use to adjust the value. Select one with or cancel with .
- km/h: horizontal speed is shown in kilometers per hour.
- mph: horizontal speed is shown in miles per hour.
- kts: horizontal speed is shown in knots.
Pressure
Defines how pressure is indicated. Inside the Units menu, select Pressure and press to get here. Use to adjust the value. Select one with or cancel with .
- hPa: pressure is shown in hecto-Pascal.
- inHg: pressure is shown in inch of mercury.
Temperature
Defines how temperature is indicated. Inside the Units menu, select Temperature and press to get here. Use to adjust the value. Select one with or cancel with .
- °C: temperature is shown in degree Celsius.
- °F: temperature is shown in degree Fahrenheit.
Key tone
Defines whether or not the Flytec Balloon 4 emits a short beep every time a key is pressed. Inside the Settings menu, select Key tone and press to get here. Use to adjust the value. Select one with or cancel with .
- off: no key tone.
- lower: key tone at a lower volume than the vario tone, but at least 25%.
- standard: key tone at the same volume as the vario tone.
- louder: key tone at a higher volume than the vario tone, but at most 100%.
Contrast
Defines the screen contrast. Depending on the ambient temperature, this may need to be adjusted to ensure good screen readability. Inside the Settings menu, select Contrast and press to get here. Use to adjust the value. Select one with or cancel with .
The contrast is set from 0 to 15, default is 6.