Translations:Flytec Balloon 4:TemperatureSettings/2/en

Pairing a TT34

In order to receive data from a TT34, its ID (which is its serial number) must be set on the Flytec Balloon 4. There are three ways to accomplish this:

• Search for all transmitting TT34 (30s), pick one from a list
• Use first TT34 received
• Manually enter the TT34 ID

TT34 search

Runs a 30-second search for all TT34 in the vicinity, then presents you with a list, from which you select the correct TT34.

1. In the Temperature menu, select Search TT34 and press start the search.
2. After the search is complete, use to select your TT34.
3. Confirm with or cancel with .

Use first TT34 received

1. In the Temperature menu, select TT34 ID and press .
2. Press and simultaneously to reset the ID to 0
3. Confirm with or cancel with .

With the ID being set to 0, the Flytec Balloon 4 will set the TT34 ID to the first ID it receives.

Manual TT34 ID entry

1. In the Temperature menu, select TT34 ID and press .
2. Enter your TT34 ID:

• • Press to increase / decrease the ID by 1
  • Press to decrease the ID by 100
  • Press to increase the ID by 100

1. Confirm with or cancel with .