Translations:Flytec Balloon 4:PersonalSettings/1/en
Personal settings
This section explains how to adjust your personal settings for the Flytec Balloon 4.
Accessing personal settings
Long press
, then use
to select Settings, press
Time zone
Defines the offset from UTC as received from GPS. Inside the Settings menu, select Time zone and press 
to get here. Use 
to adjust the value. Select one with or cancel with 
.
The UTC offset is set in hours, from -12 hours to +14 hours.
Language
Defines the language used in the flight pages and the menu. Inside the Settings menu, select Time zone and press to get here. Use to adjust the value. Select one with or cancel with .
Available languages are:
- German ("deutsch")
- English
- Spanish ("espanol")
- French ("francais")
- Italian ("italiano")
Pilot name
Enter your name - this will show during the Flytec Balloon's start-up sequence, as well as in all flight recording files. Inside the Settings menu, select Pilot name and press to get here.
Enter the pilot name, using the text input mode.
Balloon ID
Enter your balloon's ID. That can be any text, we recommend the official matriculation. This will show in all flight recording files. Inside the Settings menu, select Balloon ID and press to get here.
Enter the balloon ID, using the text input mode.
Units
During first start-up, you selected either the metric or USA basic unit set. Here we show you how to individually adjust each unit type to your preference. The units set here are used in the various indicators, as well as in the Google Earth file. Inside the Settings menu, select Units and press to get here.
Altitude
Defines how QNH and GPS altitudes are indicated. Inside the Units menu, select Altitude and press to get here. Use to adjust the value. Select one with or cancel with .
- m: altitude is shown in meter.
- ft: altitude is shown in feet.